What is after the first 1. 2. 3. 4. steps ?
|
| Arduino Info USB/FTDI programmer Add libary Remove libary RF transmit / Recive 315 or 433 Mhz CD4051B - 8 port analog multiplexer 74hc595 - 8 port shift register - output 1-Wire ® Temperature (DS18B20) i2c bus + scanner i2c Barometric Pressure + Temp(BMP085) i2c LCD 1602 Display SingleBus Temperature + Humidity(DTH11 + DTH21 + DTH22) |
Ardrino InfoWhile playing around with the raspberry pi, i found Arduino, so i desided to try it out and purchased a clone on ebay.com I desided to go with the small and cheap Arduino Pro mini After testing some setups, i found atleast 4 versions. - Please notice the one i prefere. 
Here is a list you can use as a starter kit it is very common parts, you can reuse in most setups.
but this depents on what you what to make. My recoments is to play around with some use full things like LED, tempsensors (DS18B20) and DHT22, Display (LCD1602), later on shift register (74hc595)
The only problem was i had not read that you needed a USB/FTDI programmer, so I needed to modify my USB to Serial interface List of most common versions. Orginal 
Clone - Notice Extra GND and A6 + A7 are moved ! 
Clone - Notice Extra GND + VCC and A6 + A7 are moved !! 
Clone (NANO like)- Notice Extra GND and A6 + A7 are moved ! I like this board, and it is only 3.75 including shipping to Denmark 
|